FixVault
Home › Eagle › 1991 › Premier ES › Repair and Diagnosis › Transmission › Automatic Trans › Overhaul - ZF 4HP 18 › On-Vehicle Service › Neutral Switch Replacement › Installation

Neutral Switch Replacement: Installation

  1. While under vehicle, feed switch harness up into engine compartment. Install new "O" ring on neutral switch.
  2. Insert neutral switch into A/T case, install switch bracket and tighten bolt to 89 INCH lbs. (10 N.m).
  3. Install splash shield and lower vehicle. Connect neutral switch harness connector in engine compartment.
About FixVault