FixVault
Home › Eagle › 1991 › Summit Base, 2D Hatchback, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - System/Component Tests › Engine Sensors & Switches › Idle Position Switch › Colt Vista

Colt Vista

  1. Disconnect idle speed control (ISC) motor connector. Connect ohmmeter between ISC motor connector terminal No. 3 and ground. See Figure .
  2. With accelerator pedal pressed, no continuity should be present. With accelerator pedal released, continuity should be present. If switch continuity is not as specified, replace ISC motor assembly.
About FixVault