FixVault
Home › Eagle › 1991 › Summit Base, 2D Hatchback, Standard › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Testing › Rear Wiper Switch › Eclipse

Rear Wiper Switch: Eclipse

  1. Remove wiper switch from instrument panel and disconnect wiring connector. Place wiper switch in OFF position. Continuity should exist between terminals No. 4 and 5. See Figure . Place wiper switch in ON position, continuity should exist between terminals No. 5 and 6.
  2. Place wiper switch in INT position. Continuity should exist between terminals No. 2 and 8 and between terminals No. 4 and 5. Depress washer switch. Continuity should exist between terminals No. 6 and 7. Continuity between terminals No. 1 and 3 should exist in all positions (light circuit).
About FixVault