FixVault
Home › Eagle › 1992 › Summit Base, 2D Hatchback, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - System/Component Tests › Engine Sensors & Switches › Idle Position Switch - 1.5L

Idle Position Switch - 1.5L

  1. Disconnect Motor Position Sensor (MPS) connector. Connect ohmmeter lead between ground and MPS connector terminal No. 4. See Figure .
  2. With accelerator pedal pressed, no continuity should be present. With accelerator pedal released, continuity should be present. If switch continuity is not as specified, replace Idle Speed Control Servo assembly.
About FixVault