FixVault
Home › Eagle › 1994 › Summit Wagon AWD, Standard › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Component Tests › Throttle Position Sensor Test

Throttle Position Sensor Test

  1. Disconnect sensor connector. Resistance between terminals No. 1 and 4 should be 3500-6500 ohms. Use an analog ohmmeter to measure resistance between terminals No. 1 and 3. See Figure .
  2. Slowly open throttle valve to wide open throttle. Resistance should change smoothly as throttle is opened. Replace throttle position sensor if it does not test correctly.
About FixVault