Enabling Ignition System
WARNING: This page is about a different car, the 1995 Chrysler New Yorker and 1995 Chrysler LHS. However, it is still accessible from the selected car via links, so may be relevant.
- When testing and/or repairs are completed verify battery condition. Recharge battery as required, after starter tests have been completed. Disconnect all test equipment.
- On models with conventional distributor ignition, disconnect jumper wire and connect ignition coil secondary wire to distributor cap. On models with direct ignition system, connect coil pack electrical connector. See Figure . On all models, start engine several times to verify malfunction has been corrected.