Brake Switch
Disconnect brake switch 6-pin connector. Using an ohmmeter, check for continuity at brake switch. See Fig 1. If continuity is not as specified in the BRAKE SWITCH CONTINUITY , check brake switch adjustment. If brake switch adjustment is okay, replace defective brake switch.
BRAKE SWITCH CONTINUITY
| Switch Plunger Position | Check Between Terminals No. | Continuity Present |
|---|---|---|
| Released | 1 & 4 | Yes |
| 2 & 3 | No | |
| Depressed | 1 & 4 | No |
| 2 & 3 | Yes | |