Park/Neutral Switch
- Disconnect connector at park/neutral switch. Park/neutral switch is located on transaxle, just below the shift cable. Note park/neutral switch terminal identification. See Fig 1 .
- Using ohmmeter, check that continuity exists between designated terminals in relation to shift lever position. See PARK/NEUTRAL SWITCH CONTINUITY table. If continuity is not as specified, check park/neutral switch adjustment. If adjustment is correct, replace park/neutral switch.
PARK/NEUTRAL SWITCH CONTINUITY
| Shift Lever Position | Terminal No. |
|---|---|
| Park | 3 & 4; 7 & 8 |
| Reverse | 2 & 3; 5 & 6 |
| Neutral | 3 & 12; 7 & 8 |
| Drive | 3 & 10 |
| 2 | 3 & 11 |
| Low | 3 & 9 |