Description & Operation: Notes

CAUTION: When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section before disconnecting battery.

The speed (cruise) control system is electronically controlled and vacuum operated. The electronic control is integrated into the Powertrain Control Module (PCM) located under the air cleaner housing. System consists of the following components: Powertrain Control Module (PCM), servo, speed control switches, vacuum reservoir, vehicle speed sensor, speed control relay and brakelight switch.

Main speed control switch (OFF/ON) is located on left side of instrument panel and system control switched are located on right stalk below under air bag module and consists of ACC/RES, CANCEL and COAST/SET positions.