Sensor, Air Temperature, Intake: Removal

Courtesy of CHRYSLER GROUP, LLC

NOTE:

This sensor monitors both Inlet Air Temperature (IAT) and Manifold Air Pressure (MAP).

Disconnect and isolate the negative battery cable.
Remove the engine cover (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the air cleaner body (6). Refer to REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Unlock and disconnect the electrical connector (1) from the IAT/MAP sensor.
Remove the bolt and the IAT/MAP sensor from the intake manifold.

Courtesy of CHRYSLER GROUP, LLC
The IAT/MAP sensor O-ring (1) can be reused if not damaged.