Sensor, Air Temperature, Intake: Installation

Courtesy of CHRYSLER GROUP, LLC

NOTE:

This sensor monitors both Inlet Air Temperature (IAT) and Manifold Air Pressure (MAP).

The IAT/MAP sensor O-ring (1) can be reused if not damaged.
Apply a small amount of engine oil to the sensor O-ring (1).

Courtesy of CHRYSLER GROUP, LLC
Install the IAT/MAP sensor (2) into the intake manifold with the bolt (3) tightened to 9 Nm (80 lbf-in).
Connect and lock the electrical connector (1) to the sensor.
Install the air cleaner body. Refer to INSTALLATION .
Connect the negative battery cable and tighten nut to 5 Nm (45 lbf-in).