Sensor, Camshaft Position: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the air cleaner body (1).

   Refer to BODY, AIR CLEANER, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

3. Disconnect the PCV hose (1) from the intake manifold.
4. Disconnect the vent hose (3) from the cylinder head cover.
5. Remove three bolts (2) and remove the oil separator housing (4) from the cylinder head cover.

   Courtesy of CHRYSLER GROUP, LLC

6. Unlock and disconnect the Camshaft Position (CMP) sensor wire harness connector (1).

   Courtesy of CHRYSLER GROUP, LLC

7. Remove the mounting bolt (2) and Camshaft Position (CMP) sensor (1).

   Courtesy of CHRYSLER GROUP, LLC

8. The Camshaft Position (CMP) sensor O-ring (1) can be reused if not damaged.