FixVault
Home › Fiat › 2018 › 124 Spider Classica, Standard Trans › Repair and Diagnosis › Accessories & Equipment › Drivers Assistance Systems - ADAS › Electronic Control Modules (Service Information) › Module, Engine Cooling Fan Control › Removal And Installation › Installation

Removal And Installation: Installation

  1. Position the engine cooling fan in its housing and tighten the screws.
  2. Connect the lower engine cooling fan control unit wire harness connector.
  3. Install the engine belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION .
  4. Connect the upper engine cooling fan control unit wire harness connector.
  5. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  6. Connect the negative battery cable.
About FixVault