Module, Park Assist: Installation
WARNING: This page is about a different car, the 2017 Fiat 500L. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Park Assist Module (PAM) (1) to the left quarter inner panel between the C-pillar and D-pillar.
- Secure the PAM to the quarter inner panel using a blind rivet installation tool and two new blind rivets (2).
- Reconnect the two body wire harness connectors (3) to the PAM connector receptacles.
- Reinstall the trim onto the right quarter inner panel. Refer to PANEL, QUARTER TRIM, REAR, INSTALLATION .
- Reconnect the negative cable to the battery.