FixVault
Home › Fiat › 2018 › 500L Pop › Repair and Diagnosis › Transmission › Transmission Control Systems › Aw60T/6F25 Automatic Transmission (Service Information) › Valve Body › Removal › Notes

Valve Body: Removal: Notes

  1. Drain the transmission fluid. Refer to FLUID, STANDARD PROCEDURE .
  2. Remove the engine cover. Refer to AIR CLEANER, REMOVAL .
  3. Remove the battery tray. Refer to TRAY, BATTERY, REMOVAL .
  4. Remove the electric cooling fan. Refer to FAN, COOLING, REMOVAL .
    GC0153111Courtesy of CHRYSLER GROUP, LLC
  5. Remove the side cover bolts (1).
  6. Loosen the side cover by tapping with a plastic hammer, remove the side cover.
    GC0153112Courtesy of CHRYSLER GROUP, LLC
  7. Disconnect the wire harness from the clamps.
  8. Disconnect the solenoid connectors and the speed sensor connectors (1).
    GC0153115Courtesy of CHRYSLER GROUP, LLC
  9. Remove the oil temperature sensor bolt (1) and clamp (2). Remove the sensor (3) from the valve body.
    GC0153116Courtesy of CHRYSLER GROUP, LLC
  10. Remove the speed sensor connector (1) from the solenoid clamp.
    Fig 1: Valve Body Bolts Loosening Sequence
    GC0153117Courtesy of CHRYSLER GROUP, LLC
  11. Remove the valve body bolts evenly in the sequence shown in illustration.
    GC0153118Courtesy of CHRYSLER GROUP, LLC
  12. Remove the clip from the linkage rod (1).
  13. Disconnect the linkage rod from the valve body and remove from the transmission.
About FixVault