FixVault
Home › Fiat › 2019 › 500X Pop › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Delivery › Sending Unit And Sensor, Fuel Level › Removal And Installation › Removal

Removal And Installation: Removal

  1. Remove the fuel pump module. Refer to MODULE, FUEL PUMP, REMOVAL  .
    GC0190273Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the wire harness connector (1) for the fuel level sending unit.
    GC0189150Courtesy of CHRYSLER GROUP, LLC
  3. Press the top of the clips (1a) inwards and then lift up the fuel level sensor (1b) complete with float and remove it.
About FixVault