Removal And Installation: Removal
NOTE:
In case of replacement of the throttle body, connect the diagnosis tool, enter "actuators" and execute the self-learning procedure.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the turbocharger to throttle body air outlet pipe. Refer to COOLER AND HOSES, CHARGE AIR, REMOVAL
.
- Remove wire harness from the retaining clip (1a).
- Disconnect the wire harness connector (1b) from the throttle body.
- Remove the screws (1a) and remove the throttle body (1b).
- Remove the gasket.