FixVault
Home › Fiat › 2020 › 500L Pop › Repair and Diagnosis › External Pages › Different car › Section 73 (Electronic Control Modules (Service Information)) › Module, Instrument Panel Cluster (IPC) › Module Programming

Module Programming

WARNING: This page is about a different car, the 2020 Fiat 124 Spider. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the diagnostic scan tool.
  2. Turn the ignition ON to the RUN position (engine not running).
  3. With the diagnostic scan tool, clear all Diagnostic Trouble Codes (DTC).
  4. Turn ignition OFF then ON to the RUN position and confirm DTCs are cleared.
  5. Using the diagnostic scan tool, navigate to the Instrument Panel Cluster (IPC) Misc Functions menu and run the Variant Coding procedure.
About FixVault