4 Cylinder Models
- Mark hinges for reinstallation and remove hood. Drain crankcase and cooling system. Disconnect all electrical wiring, vacuum and water hoses. Remove radiator and fan. Remove A/C compressor from mounting bracket and lay aside with refrigerant lines attached.
- Disconnect flexible fuel line from fuel tank line and remove starter. Raise vehicle and remove flywheel or converter housing upper bolts. Disconnect exhaust pipe at manifold, then right and left engine mounts at underbody bracket. Remove flywheel or converter housing cover.
- With manual transmission, remove flywheel housing lower bolts. With automatic transmission, disconnect converter from flywheel and remove converter housing lower bolts.
- Lower vehicle and support transmission on a jack. Attach suitable hoisting tackle to engine lifting brackets and remove engine from vehicle.