FixVault
Home › Ford › 1981 › Courier 2.3L Eng VIN 2, Automatic Trans › Repair and Diagnosis › Engine Performance › Fuel Delivery › Deceleration Control System › Testing › Throttle Positioner › System Test

System Test

  1. Start engine and set idle speed. Remove black/white or brown/red wire (as equipped) from 3-way solenoid. Engine speed should increase to 1000 RPM (Federal) or 1100 RPM (Calif.).
  2. If not, 3-way solenoid or servo diaphragm is improperly operating. See "Servo Diaphragm" testing below.  Replace units as required.
About FixVault