Single Switch
- With the switch in the neutral position, use an ohmmeter to test switch. Continuity should exist between terminals No. 1, 2, 3, and 5. Continuity should also exist between No. 4 and 6. See Fig. 2.
- With switch pushed downward, continuity should exist between terminals No. 2, 4 and 5. Continuity should also exist between No. 1 and 3. Terminal No. 6 should be disconnected from all other terminals.
- With switch pushed upward, there should be continuity between terminals No. 2, 3, and 5; also No. 4 and 6. Terminal No. 1 should be disconnected from all other terminals. If switch does not operate as indicated in any test, replace switch.