FixVault
Home › Ford › 1985 › Cutaway 6.9 1 › Repair and Diagnosis › Engine Performance › System › Fuel Injection System - 6.9L Diesel › Adjustments › Injection Pump Timing › Static Timing (Engine Stopped)

Static Timing (Engine Stopped)

  1. Remove fast idle bracket and solenoid from injection pump. Loosen (keep snug) 3 nuts attaching fuel injection pump to pump mounting adapter with Injector Pump Wrench (T83T-9000-B).
  2. Install Injection Pump Rotator (T83T-9000-C) on front of pump. Rotate pump to align injection pump mounting flange timing mark with pump mounting adapter timing mark. See Fig 1 .
    Fig 1: Static Timing Mark Alignment Keep mounting nuts snug during static timing check.
    G8720
  3. Remove tools and tighten mounting nuts. Visually recheck timing to ensure that marks are still aligned after tightening nuts.
About FixVault