Thunderbird Programmable Seat Switch Test

1. With No. 1 button pressed, there should be continuity between terminals No. 1 and 2. With No. 2 button pressed, there should be continuity between terminals No.1 and 3. With SET button pressed, there should be continuity between terminals No. 1 and 4.
2. To test LED, ground terminal No. 5 and connect terminal No. 6 to battery positive. LED should glow. See Fig 2 and Fig 4.

NOTE: Testing for all other types of switches is detailed in Figs. Fig 1, Fig 3, and Fig 5. If switch fails any test, replace switch.

Fig 1: Terminal ID & Switch Test for Arm Rest Mounted Switches Courtesy Ford Motor Co.

Fig 2: Thunderbird Programmable Seat Switch Courtesy Ford Motor Co.

Fig 3: Terminal ID & Switch Test for Seat Mounted Switch Courtesy Ford Motor Co.

Fig 4: Thunderbird Programmable Seat Switch Connector Courtesy Ford Motor Co.

Fig 5: Seat Regulator Control Processor Assembly Connector Courtesy Ford Motor Co.

Fig 6: Seat Regulator Control Processor Assembly Courtesy Ford Motor Co.