Door Lock Switch
- Using a self-powered test light, there should be no continuity between any terminals with switch in "NEUTRAL" position. With switch in "DOWN" position, continuity should exist between terminals No. 2, 4 and 5, and 1 and 3. Terminal No. 6 should be disconnected from any other terminal.
- With switch in "UP" position, continuity should exist between terminals No. 2, 3 and 5, and 4 and 6. Terminal No. 1 should be disconnected from any other terminal. If switch does not test as stated, replace switch.
Courtesy of FORD MOTOR CO.