Removal (1.9L)
- Remove air cleaner outlet tube between vane air meter and air throttle body by loosening 2 clamps. Disconnect and remove accelerator and speed control cables from accelerator mounting bracket and throttle lever.
- Disconnect top manifold vacuum fitting connections by disconnecting both rear vacuum line for dash panel vacuum tree and vacuum line at intake tee. Disconnect hoses from PCV valve at intake manifold.
- Disconnect vacuum line at EGR valve. Disconnect EGR tube from upper intake manifold by loosening compression nut while supporting connector. Remove only upper bolt to disconnect upper manifold support bracket. Disconnect wiring at main engine harness and ECT sensor.
- Disconnect fuel lines. Remove 6 manifold mounting nuts. Disconnect lower manifold support bracket by removing top bolt. Remove manifold with wiring harness and gasket.