Ignition Timing
NOTE:
Timing light should be connected to No. 1 spark plug wire using an adapter or clamp-on connector. Do not puncture spark plug wire or boot to make connection.
- Set parking brake and block wheels. Disconnect automatic parking brake. Turn all accessories off. Place transmission in Neutral. Connect timing light to engine. Disconnect single in-line spout connector near distributor.
- Start engine and warm to normal operating temperature. With engine at timing RPM, adjust timing. Turn engine off. Disconnect timing light and reconnect single in-line spout connector.
IGNITION TIMING SPECIFICATIONS
| Application | Degrees BTDC @ RPM |
|---|---|
| All Engines | 10 @ 650 |