FixVault
Home › Ford › 1989 › Cutaway 7.3 M › Repair and Diagnosis › Engine Performance › System › Fuel Injection System - Diesel › Adjustments › Injection Pump Static Timing

Injection Pump Static Timing

  1. Remove fast idle bracket and solenoid from injection pump. Loosen 3 nuts attaching fuel injection pump to pump mounting adapter with Injection Pump Wrench (T86T-9000-C).
  2. Install Injection Pump Rotator (T83T-9000-C) on front of pump. Rotate pump to align injection pump mounting flange timing mark with pump mounting adapter timing mark. See Fig 1 .
  3. Remove rotator and tighten mounting nuts. Visually check timing to ensure marks are still aligned after tightening nuts. Install fast idle bracket and solenoid.
    Fig 1: 7.3L Static Timing Mark Alignment
    G72711Courtesy of FORD MOTOR CO.
About FixVault