FixVault
Home › Ford › 1989 › Probe GL, Automatic › Repair and Diagnosis › Electrical › Gauges › Instrument Panel - Electronic › Testing › Warning Light System Check

Warning Light System Check

  1. Turn ignition switch to "ON" position (engine not running). Observe operation of warning lights. Start engine. Again observe operation of warning lights.
  2. If brake warning light will not come on when ignition switch is turned on (engine not running), go to BRAKE WARNING LIGHT CHECK.
  3. If seat belt warning light will not come on when ignition switch is turned on (engine not running), go to SEAT BELT WARNING LIGHT INOPERATIVE CHECK.
  4. If check engine warning light will not come on when ignition switch is turned on (engine not running), go to ECA CHECK.
  5. Start engine. If brake warning light will not go off when engine is running, go to BRAKE LIGHT WILL NOT GO OFF.
  6. If seat belt warning light will not go off when engine is running, go to SEAT BELT WARNING LIGHT SHORT CHECK NO. 1.
  7. If check engine warning light will not go off when engine is running, go to CHECK ENGINE WARNING LIGHT WILL NOT GO OFF.
About FixVault