FixVault
Home › Ford › 1990 › Probe GL, Automatic › Repair and Diagnosis › Electrical › Gauges › Instrument Panel - Standard › Testing › Instrument Cluster Supply Check

Instrument Cluster Supply Check

  1. Check for 11-13 volts on Black/Yellow wire at instrument cluster 18-pin connector. See Figure . Connector is located on right side of dash, near steering column.
  2. Observe voltmeter reading. If voltmeter reads 11-13 volts, go to INSTRUMENT CLUSTER GROUND CHECK  . If voltmeter does not read 11-13 volts repair Black/Yellow wire between gauges and fuse panel.
About FixVault