FixVault
Home › Ford › 1990 › Probe GL, Standard › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Testing › Rear Wiper › Park Function Inoperative

Park Function Inoperative

  1. Turn ignition ON. With rear wiper operating, turn ignition OFF to position wiper in center of travel. Remove REAR WIPER fuse. Turn rear wiper OFF.
  2. Connect ohmmeter between ground and rear wiper motor housing. If there is no continuity, repair housing ground and install fuse. If there is continuity, install fuse and go to step 3).
  3. Connect ohmmeter between ground and Blue/Yellow wire at rear wiper motor connector. If there is no continuity, replace rear wiper motor.
About FixVault