FixVault
Home › Ford › 1990 › Probe GL, Standard › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Heater System › Adjustment › Temperature Control Cable

Temperature Control Cable

  1. Position temperature control lever in "MAX WARM" position. Remove left side sound deadening panel. Remove cable, located on right side of heater case, from cable housing brace.
  2. With cable end on door lever pin, push door lever down to extreme stop. Secure cable into housing brace. Check temperature control lever for proper operation. Install left side sound deadening panel.
About FixVault