Valve Clearance
NOTE:
On 2.9L models, valve clearance is set by turning adjusting screw an additional 1 1/2 turns past zero lash. On all other models, no valve adjustment is required as hydraulic valve lifters are used. If incorrect valve clearance is suspected, collapse lifter before checking clearance.
COLLAPSED VALVE LIFTER CLEARANCE
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| 2.9L | (1) | ||||
| 3.0L | .088-.189 (2.23-4.77) | ||||
| 4.0L | (2) | ||||
|
|||||