FixVault
Home › Ford › 1991 › Probe GL, Standard › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Testing › Rear Wiper Test › Park Function Inoperative Test

Park Function Inoperative Test

  1. Turn ignition on. With rear wiper operating, turn ignition off to position wiper in center of travel. Remove REAR WIPER fuse. Turn rear wiper off.
  2. Connect ohmmeter between ground and rear wiper motor housing. If continuity does not exist, repair housing ground and install fuse. If continuity exists, install fuse and go to step 3).
  3. Connect ohmmeter between ground and Blue/Yellow wire at rear wiper motor connector. If continuity does not exist, replace rear wiper motor.
About FixVault