FixVault
Home › Ford › 1992 › Probe GL, Standard › Repair and Diagnosis › Electrical › Gauges › Instrument Panel - Analog › Testing › Abs Signal Testing › ABS Signal Check No. 2

ABS Signal Check No. 2

  1. Ensure ignition is off. Ground Blue/Yellow wire at ABS control module connector. See IDENTIFYING ABS MODULE CONNECTORS illustration. ABS connector is located at ABS control module, under left front seat.
  2. Set ignition switch to RUN position. If ABS warning light comes on, check ABS system, and repair as necessary. If ABS warning light does not come on, go to ABS LIGHT CHECK.
About FixVault