Steering Angle Sensor Resistance Check
- Turn ignition off. Remove steering column cover and disconnect steering angle sensor connector. Set steering wheel so wheels are straight.
- Measure resistance between wires indicated in STEERING ANGLE SENSOR RESISTANCE TABLE . If resistances are as specified, proceed to PINPOINT TEST C3 . If resistances are NOT as specified, replace steering angle sensor.
STEERING ANGLE SENSOR RESISTANCE
| Wires | k/ohms |
|---|---|
| Green & Green/White | 0-15 |
| Green & Green/Yellow | 40-60 |
| Green/Yellow & Green/White | 30-50 |