FixVault
Home › Ford › 1992 › Probe LX, Standard › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension - Programmed Ride Control › Self-Diagnostics › Test Qt4 › Continuous Monitor Test

Continuous Monitor Test

  1. Ensure vehicle passed TEST QT1-QT3. Turn ignition and voltmeter on. While an assistant turns steering wheel from left stop to right stop, tap, wiggle and move PRC components and wiring harness. Observe voltmeter and record any service codes.
  2. If Code 2 is indicated, proceed to TEST QT5. If no codes are indicated, proceed to PINPOINT TEST B1. If any other code(s) are indicated, proceed to PINPOINT TEST Q1.
About FixVault