FixVault
Home › Ford › 1993 › Crown Victoria Base › Repair and Diagnosis › Steering › Power Steering › Steering System - Variable Assist › Quick Tests › Quick Test D2 › VSS Check

VSS Check

  1. Turn ignition off. Disconnect EVO control module 14-pin harness connector. Examine wiring harness for damage. Verify following circuits correspond to these pin numbers:
    • Gray/Black wire (circuit No. 679) in pin No. 9
    • Gray/Red wire (circuit No. 359) in pin No. 8
  2. If damaged or crossed wires are found, repair harness and proceed to QUICK TEST A1  . If wires are okay, proceed to QUICK TEST D3  .
About FixVault