FixVault
Home › Ford › 1993 › Explorer 2D Utility, RWD, Automatic › Repair and Diagnosis (Single Page) › Drivelines & Axles › Locking Hubs › Testing › Electronic Shift Transfer Case › Control Module Self-Test

Control Module Self-Test

  1. To perform electronic control module self-test, remove the 5-wire connector and the 8-wire connector from the module. Turn ignition switch to "RUN" position.
  2. Activate the self-test switch and note result. A flashing indicator light indicates control module is okay. A steady indicator light indicates control module is inoperative and must be replaced.
About FixVault