FixVault

Control Module

With control module connector connected, verify terminals have the proper specification as shown in CONTROL MODULE SPECIFICATIONS table. See Figure. If any terminal fails test, replace control module. Control module is located behind trim panel in body cavity at left rear of driver's seat.

CONTROL MODULE SPECIFICATIONS

Terminal No. Input Specification
1 Voltage With UNLOCK Switch Pressed
2 Voltage With LOCK Switch Pressed
4 Ground At All Times
7 Voltage With LOCK Switch Pressed
8 Battery Power At All Times
Fig 1: Power Door Lock Control Module Terminal Locations
G94J65101Courtesy of FORD MOTOR CO.