Camber Adjustment (Front)

Camber/Caster Adjusters (T79P-3000-A) are needed to adjust camber angles. Insert camber/caster adjusters into frame holes. See Fig 1 . Tighten adjuster hooks finger tight against upper arm inner shaft. Tighten hex nut of each adjuster one additional hex flat.
Loosen upper arm inner shaft-to-frame retaining bolts so lock washers are unloaded. Firmly tap bolt heads to ensure loosening of retaining bolts. Adjust camber angle. Tighten upper arm inner shaft-to-frame retaining bolts.

Fig 1: Adjusting Camber/Caster

Courtesy of FORD MOTOR CO.