FixVault
Home › Ford › 1994 › Escort Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Servicing - A/T › Adjustments › Manual Lever Position Sensor

Manual Lever Position Sensor

  1. Put shift selector lever in Neutral position. Remove nut holding manual shaft lever to manual shaft. Remove lever from manual shaft. Loosen manual lever position sensor mount bolts.
  2. Insert a .079" (2.0 mm) pin in alignment holes. Tighten sensor mounting bolts to specification and remove alignment pin. See TORQUE SPECIFICATIONS  . Install manual shaft lever onto manual shaft.
About FixVault