Wiper Motor Test
WARNING: This page is about a different car, the 1994 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
- Disengage wiper arm linkage from motor. Unplug connector from wiper motor. Connect jumper wire from Black wire terminal on wiper motor to ground.
- Connect fused jumper between positive battery terminal and Blue/White wire terminal of wiper motor. Motor should run at low speed. Disconnect jumper from Blue/White wire terminal and reconnect it to Red wire terminal of wiper motor. Motor should run at high speed. Replace motor if operation is not as specified.