FixVault
Home › Ford › 1995 › Probe Base, Standard › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper/Washer System - Rear › Testing › Wiper/Washer Switch Test

Wiper/Washer Switch Test

  1. Unplug connector from rear wiper switch. With switch in ON position, continuity should exist between Black/Blue wire and Black wire terminals of switch. Continuity should not exist with switch in OFF position. Replace switch if continuity is not as specified.
  2. Unplug connector from rear washer switch. With switch in ON position, continuity should exist between Blue/Yellow wire and Black wire terminals of switch. Continuity should not exist with switch in OFF position. Replace switch if continuity is not as specified.
About FixVault