Power Seat Switch
Using an ohmmeter, check for continuity between indicated switch connector terminals when switch is activated as specified. See POWER SEAT SWITCH CONTINUITY table. See Fig 1. Replace switch if it does not test as specified.
POWER SEAT SWITCH CONTINUITY
| Switch Position | Continuity | ||
|---|---|---|---|
| Neutral (1) | 1, 3, 4, 5, 6, 7 & 8 | ||
| "A" | 2 & 7; 1, 3, 4, 6 & 8 | ||
| "B" | 2 & 5; 1, 3, 4, 6, 7 & 8 | ||
| "C" (Up) | 1, 2 & 7; 3, 4, 5, 6 & 8 | ||
| "C" (Down) | 2, 5 & 6; 1, 3, 4, 7 & 8 | ||
| "C" (Right) | 2 & 3; 1, 4, 5, 6, 7 & 8 | ||
| "C" (Left) | 2 & 8; 1, 3, 4, 5, 6 & 7 | ||
| "D" | 1 & 2; 3, 4, 5, 6, 7 & 8 | ||
| "E" | 2 & 6; 1, 3, 4, 5, 7 & 8 | ||
|
|||