Service Tool Bleeding
NOTE:
The use of ABS Bleeder Box Adapter (T90P-50-ALA) and Jumper Cable (T93T-50-ALA) is required in conjunction with pressure bleeding, to bleed system when Hydraulic Control Unit (HCU) is replaced.
- Connect ABS Bleeder Box Adapter (T90P-50-ALA) and Jumper Cable (T93T-50-ALA) to HCU.
- Depress brake pedal and depress VALVES button on bleeder box. Brake pedal height should drop. Release VALVES button and release brake pedal.
- Repeat steps 2 and 3) one more time. Depress MOTOR START button allow pump motor to operate for one minute, then proceed with pressure bleeding the brake system. See BLEEDING BRAKE SYSTEM procedures.