FixVault

Section 130 (Engine Controls - Specifications - 5.8L): Capacities

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
BATTERY SPECIFICATIONS

Application & Group Cold Cranking Amps
Standard BXT-65 650
Optional BXT-65 850
COOLING SYSTEM CAPACITIES

Application Qts. (L)
Bronco & Pickup 15.0-17.0 (14.0-16.0)
Van
Standard Cooling 20.0 (19.0)
A/C Or Super Cooling 23.0 (20.0)
CRANKCASE CAPACITIES

Application (1) Qts. (L)
5.8L (2) 5.0 (4.70)
(1) Add 1/2 qt. if equipped with oil cooler.
(2) On Pickup, 6 quarts (5.6L).
TRANSMISSION & TRANSFER CASE CAPACITIES

Application Specification Quantity
Bronco
AOD Auto. Mercon 12.3 Qts. (11.6L)
C-6 Auto. (4WD) Mercon 13.5 Qts. (12.7L)
E4OD Auto. (2WD) Mercon 16.2 Qts. (15.3L)
4-Speed (Warner T-18) SAE 80W-90 3.5 Qts. (3.3L)
5-Speed Overdrive (Mazda R-2) Mercon 3.8 Qts. (3.6L)
Transfer Case (Warner 13-56) Mercon 2.0 Qts. (1.9L)
Pickup
AOD Auto. (2WD) Mercon 12.3 Qts. (11.6L)
C-6 Auto. (2WD) Mercon 12.0 Qts. (11.4L)
C-6 Auto. (4WD) Mercon 13.5 Qts. (12.7L)
E4OD Auto. (2WD) Mercon 15.7 Qts. (14.8L)
E4OD Auto. (4WD) Mercon 16.2 Qts. (15.3L)
4-Speed (Warner T-18) SAE 80W-90 3.5 Qts. (3.3L)
5-Speed Overdrive
Mazda R-2 Mercon 3.8 Qts. (3.6L)
ZF S5-42 Mercon 3.4 Qts. (3.2L)
Transfer Case (Warner 13-56) Mercon 2.0 Qts. (1.9L)
Van
AOD Auto. Mercon 12.3 Qts. (11.6L)
C-6 Auto. Mercon 12.0 Qts. (11.4L)
E4OD Auto. Mercon 15.7 Qts. (14.8L)
5-Speed Overdrive (ZF HD) Mercon 3.4 Qts. (3.2L)
AXLE CAPACITIES

Application Pts. (L)
Bronco
Front 3.8 (1.80)
Rear (8.8" Ford (1) ) (2) 5.5 (2.60)
Pickup
Front
Dana 44-IFS L.D. 3.6 (1.70)
Dana 50-IFS H.D. 3.8 (1.80)
Dana 60 Monobeam 5.8 (2.80)
Rear
8.8" Ford 5.5 (2.60)
10.25" Ford (3) 7.5 (3.50)
11.25" Dana 80 8.3 (3.90)
Van (Rear)
8.8" Ford (1) (2) 5.5 (2.60)
9.75" Dana M60-1U 6.3 (3.00)
10.5" Dana M70-2U 6.6 (3.10)
10.5" Dana M70-1HD 7.4 (3.50)
(1) Conventional and Traction-Lok.
(2) Add 4 oz. friction modifier for Traction-Lok axles.
(3) Conventional and Traction-Lok, Semi and Full Float.