Wiper Switch
Wiper switch is incorporated into multifunction switch on steering column. Turn ignition off. Disconnect multifunction switch 14-pin connector. Using an ohmmeter, check for continuity between switch terminals with switch in specified positions. See FRONT WIPER SWITCH CONTINUITY table. See Figure . Replace multifunction switch as necessary.
FRONT WIPER SWITCH CONTINUITY
| Position | Terminal (Wire Color) |
|---|---|
| Off | 4 (BLU/BLK) & 13 (BLU/WHT) |
| Interval | 4 (BLU/BLK) & 13 (BLU/WHT) |
| Low Speed | 11 (BLU & 13 (BLU/WHT) |
| High Speed | 11 (BLU) & 12 (RED) |
| Mist | 11 (BLU) & 12 (RED) |
| Wash | 11 (BLU) & 5 (BLU/ORG) |