FixVault
Home › Ford › 1997 › Probe Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - Tests W/Codes - 2.0L › Drive Cycles › Fuel Monitor Or Ho2S Monitor Repair Verification Drive Cycle

Fuel Monitor Or Ho2S Monitor Repair Verification Drive Cycle

  1. Refer to and complete the vehicle check and preparation before initiating the following repair verification steps. See VEHICLE CHECK/PREPARATION .
  2. Start the engine and drive the vehicle for 7 minutes:
    • Drive in stop-and-go traffic for 6 minutes, include one idle.
    • Accelerate to 45 MPH (72 km/h) at more than 1/2 throttle (Escort/Tracer 35 MPH (56 km/h). Maintain speed for one minute.
  3. Repeat quick test. See QUICK TEST .
About FixVault