Disarm Switch: Installation
WARNING: This page is about a different car, the 1997 Lincoln Mark VIII. However, it is still accessible from the selected car via links, so may be relevant.
- Install disarm switch on door lock cylinder. Ensure disarm switch wiring is facing in the original direction. Install operating lever on door lock cylinder. Ensure reference mark on operating lever and door lock cylinder are aligned. Install clip. Ensure clip is fully seated.
- To install remaining components, reverse removal procedure. Tighten outside door handle assembly-to-door retaining bolts and keyless entry keypad-to-outside door handle bolt to 71 INCH lbs. (8.0 N.m).