FixVault
Home › Ford › 1997 › Probe Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 51 (Power Windows) › Removal & Installation › Power Window Motor › Installation

Power Window Motor: Installation

WARNING: This page is about a different car, the 1997 Lincoln Mark VIII. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble window drive motor to regulator assembly. Tighten motor-to-regulator bolts until snug, do not fully tighten. Connect wiring to motor.
  2. Connect negative battery cable. Operate window to ensure proper gear engagement. Tighten motor-to-regulator bolts to 44-79 INCH lbs. (5-9 N.m). Install door panel and trim.
About FixVault